New VHE Series Polymer Hybrid Aluminum Electrolytic Capacitors Address Automotive Thermal Management System FAQs

Question 1

Which automotive thermal management system components are suitable for the VHE series?

Accepted Answer

The VHE series is designed for high-power density applications including electronic water pumps, electronic oil pumps, and cooling fans. It ensures stable operation in harsh environments up to 150°C engine compartment temperatures.

Question 2

What is the ESR of the VHE series?

Accepted Answer

Maintains 9-11 mΩ ESR over -55°C to +135°C, with ≤22% fluctuation at 60°C temperature difference. This reduces high-temperature losses and voltage fluctuation interference.

Question 3

What is the ripple current handling capability?

Accepted Answer

Ripple current handling is 1.8 times higher than VHU series, effectively absorbing high ripple current from motor drives. Reduces energy loss by 15% and increases electronic water pump power to 300W.

Question 4

How does the VHE series withstand high temperatures?

Accepted Answer

Rated for 135°C operation with 150°C ambient tolerance. Offers 4,000-hour lifespan at 135°C, equivalent to 1.3 times competitors' lifespan at 125°C.

Question 5

How does the VHE series demonstrate reliability?

Accepted Answer

Features enhanced overload/shock resistance, supports 1.3× rated voltage surges (e.g., 45.5V for 35V model). Vibration failure threshold increased by 50% (50G → 75G).

Question 6

Differences between VHE and VHU series?

Accepted Answer

VHE upgrades: Lower ESR (9-11mΩ vs VHU), 1.8× ripple current, higher temperature resistance (150°C ambient support).

Question 7

How does VHE address thermal management challenges?

Accepted Answer

Solves high power density demands with ultra-low ESR and high ripple current handling. Optimizes thermal design, reduces system costs by 15%.

Question 8

Cost-effectiveness advantages?

Accepted Answer

Reduces energy loss and heat generation, lowering system maintenance costs. Provides 30% higher current capacity than competitors in same size.

Question 9

How effective in reducing failure rates?

Accepted Answer

Reduces vibration-induced failures to <200 FIT (vs competitors >200 FIT). Ensures stable operation under dynamic conditions like frequent start-stop cycles.

Question 10

Is VHE series automotive-certified?

Accepted Answer

Meets automotive-grade standards: 135°C/4000h testing, RoHS 2.0, REACH SVHC 223 compliant. Test reports available upon request.

Question 11

Can VHE address voltage fluctuations?

Accepted Answer

Ultra-low ESR (9mΩ level) suppresses current surges, reducing interference with sensitive devices by 25%.

Question 12

Can VHE replace solid-state capacitors?

Accepted Answer

Yes. Hybrid structure combines high capacitance with low ESR, offering longer lifespan (135°C/4000h) than conventional solid capacitors.

Question 13

Heat dissipation requirements?

Accepted Answer

ESR optimization reduces heat generation by 30%, simplifying heat dissipation solutions. Can be installed directly near turbochargers.

Question 14

Low-temperature performance at -55°C?

Accepted Answer

Maintains >85% capacity retention and ≤11mΩ ESR at -55°C through electrolyte-polymer synergy.

Question 15

Voltage surge tolerance?

Accepted Answer

Supports 1.3× rated voltage for 100ms (e.g., 45.5V for 35V model) with enhanced overload tolerance.

Question 16

Comparative advantages vs Panasonic/Chemi-con?

Accepted Answer

Superior ESR stability: ≤1.8mΩ fluctuation vs competitors >4mΩ. 30% higher current capacity. 50% higher vibration threshold (75G vs 50G). 1.3× longer lifespan at equivalent temperatures.

Question 17

Specific ESR fluctuation range?

Accepted Answer

9-11mΩ from -55°C to 135°C with ≤22% fluctuation at 60°C ΔT, outperforming VHU's 35%+ fluctuation.

Question 18

Starting performance at -55°C?

Accepted Answer

>85% capacity retention and ≤11mΩ ESR maintained through hybrid material synergy.

Question 19

Environmental compliance?

Accepted Answer

Meets RoHS 2.0 and REACH SVHC 223 requirements for automotive applications.

Question 20

High-frequency switching stability?

Accepted Answer

Supports thousands of switching cycles per second in PWM-driven applications like cooling fans.

Blog

New VHE Series Polymer Hybrid Aluminum Electrolytic Capacitors Address Automotive Thermal Management System FAQs

One-touch ignition! YMIN supercapacitors put an end to the era of heavy-duty truck stalls.

YMIN Capacitors: The “Invisible Heart” of PD Fast Charging: How Do They Reshape the Charging Experience?

New VHE Series Polymer Hybrid Aluminum Electrolytic Capacitors: Four Core Advantages Overcome the Challenges of Automotive Thermal Management System Capacitors

YMIN Film Capacitors: High-Efficiency Voltage Stabilizers for Photovoltaic PCS Inverters

The “Efficient Heart” of Energy Storage Systems：YMIN Capacitors

How to choose a Xiaomi power bank under the 3C certification?

Empowering New Energy Vehicle Thermal Management Systems, Overcoming High-Temperature Challenges – YMIN Capacitors

YMIN Capacitors: The “Guardians of Sound Quality” for New Energy Vehicle Audio Systems

Live coverage of YMIN booth at WAIC: Exploring the “capacitor power” behind AI intelligent applications

The performance-enhancing artifact for the power heart of drones: YMIN capacitors

YMIN Electronics made its debut at the WAIC exhibition with its high-reliability capacitor solutions, focusing on the four cutting-edge fields of AI!

What is the purpose of capacitors in power supplies? What are the consequence...

YMIN High-Capacity-Density Solid-State Capacitor Solution: Overcoming Design ...

Uninterrupted Protection: YMIN Capacitors Build a Solid Data Security Barrier...

Providing Stable Power for NVIDIA H200: How Capacitors Define the Reliability...

YMIN VHE Series Polymer Hybrid Aluminum Electrolytic Capacitors: High Ripple ...

How Does Xiaomi’s 3-in-1 Power Bank Achieve Optimal Capacitor Selection...